EasyManua.ls Logo

Seat Exeo 2012 - Page 163

Seat Exeo 2012
313 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
161Air conditioning
Switching the temperature display from °C to °F and vice
versa
The temperature display can be switched from °C (degrees
Celsius) to °F (degrees Fahrenheit) and vice versa.
Press and hold the
button for air recirculation mode and
briefly press the plus button of the left-hand temperature selec-
tor ⇒ fig. 130.
Switching the air conditioner on/off
Switching the air conditioner off: models with an
OFF
button
Press the
OFF
button. The air conditioner is switched off and
the supply of air from outside the vehicle is cut off.
Switching the air conditioner off: models with a
button
Keep pressing the
-
button for the blower until the display seg-
ment is empty. The air conditioner is switched off and the sup-
ply of air from outside the vehicle is cut off.
Switching the air conditioner on: models with an
OFF
button
Press the
OFF
button again, or
Press the
AUTO
button or
Press one of the air distribution buttons
,
or
.
Switching the air conditioner on: models with a
button
Press the
+
button for the blower, or
Press the
AUTO
button or
Press one of the air distribution buttons
,
or
.
The air conditioner also starts to operate if one of the blower or temperature
selector buttons is pressed.
Blower speed
-
+
The automatically selected blower speed can be reduced or
increased manually.
Press the
-
and
+
buttons in the centre of the control panel
⇒ fig. 130 to set the blower to the desired speed (and regulate
the volume of air delivery).
The air conditioner system automatically regulates the blower speed accord-
ing to the interior temperature. However, you can also adjust the air delivery
manually. The current blower setting is illustrated by a bar in the middle dis-
play (above the buttons).
Automatic change of passenger temperature
In order to automatically set the passenger temperature like the driver tem-
perature, press the
AUTO
button on the driver side for 2 seconds approxi-
mately. In order to automatically set the driver temperature like the passen-
ger temperature, press the
AUTO
button on the passenger side for 2 sec-
onds approximately.
Safety First Operating Instructions Practical Tips Technical Specifications

Table of Contents

Related product manuals