89Cockpit
Controlling the menu
The menu display is called up via the
Reset
button and the
rocker switch on the windscreen wiper lever. Use these con-
trols to make checks and adjust the settings.
Fig. 63 Windscreen wip-
er lever: Reset button
and rocker switch
Functions of the
Reset
B
⇒ fig. 63 and the rocker switch
A
:
Activating the menu
– Press the
Reset
button until the menu display ⇒ fig. 62 ap-
pears.
Selecting and setting
– Press the rocker switch to select one of the menus. Press "up"
or "down" on the switch to select the options accordingly.
Entering and confirming
– Press the
Reset
button.
Use the rocker switch to select the menus and adjust various values. The se-
lected values are highlighted on a red background.
By pressing the
Reset
button, you can confirm the option you have selected
or the value you have set. Selected functions are marked with a tick.
The following symbols are used:
Cursor Function selected Red background (active
function)
Tick Selected
Box Not selected
Triangle pointing upwards Previous page
Triangle pointing down-
wards
Next page
Tyre pressure monitoring*
Introduction
The tyre pressure monitoring system constantly checks the
pressure of the tyres.
The system warns the driver in the event of a loss of pressure by means of
symbols and messages in the instrument panel display. The system works
with the help of the ABS sensors in the wheels.
Please bear in mind that the tyre inflation pressure is also influenced by the
temperature of the tyre. Tyre pressure increases about 0.1 bar for each 10 °C
in tyre temperature increase. The tyre heats up while the vehicle is being
Safety First Operating Instructions Practical Tips Technical Specifications
To Next Page
Loading...
