Seat Leon 2013 - Repairing Suspension Strut

– Tighten nuts -arrows-.
– On vehicles with vehicle level sender, carry out basic setting
⇒ Vehicle diagnostic tester.
Specified torques
♦ ⇒ “3.1 Assembly overview - suspension strut, upper suspen‐
sion link”, page 56
♦ ⇒ “4.1 Assembly overview - lower suspension link, swivel
joint”, page 68
♦ ⇒ “2.1 Assembly overview - subframe”, page 18
♦ ⇒ “2.1 Assembly overview - front vehicle level sender”,
page 281
♦ ⇒ “6.2 Assembly overview - drive shaft”, page 98
3.3 Repairing suspension strut
Special tools and workshop equipment required
♦ Shock absorber set - T10001-
♦ Torque wrench - V.A.G 1332-
♦ Insertable ring tool - V.A.G 1332/7-
León 2013 ➤ , León ST 2013 ➤
Running gear, axles, steering - Edition 06.2018
3. Suspension strut, upper suspension link 65