Seaward PrimeTest 100 User Manual

PrimeTest 100 Operating Instructions
11
indicated as shown below.
• The test sequence is halted.
• If the measured value is less than 20 ohms but
greater than the factory set pass/fail threshold,
the measured value is displayed and the unit
indicates a fail result as shown below
• If the measured value is less than the factory set
pass/fail threshold, the measured value is
displayed and the unit indicates a pass result, as
shown below.

Seaward PrimeTest 100 Specifications

General

Brand	Seaward
Model	PrimeTest 100
Category	Test Equipment
Language	English