Model 664 23
GB
9. Maintenance
Your seca scale leaves the factory with an accuracy greater than ± 0.15 %. To ensure that
this degree of accuracy is maintained, the product must be carefully set up and regularly
serviced. Depending on frequency of use, we recommend servicing at intervals of 3 to 5
years. Please note that a qualified servicing agent should be used for this. If you are in doubt,
seca Customer Service will give you more information.
10. Technical data
Dimensions: (width, length, height)
Scale in position for use, ramps folded out: 1102 x 1150 x 911 mm
Scale in position for use, ramps folded away: 1102 x 985 x 911 mm
Scale in upright position: 193 x 986 x 1102 mm
Weight approx. 30,3 kg
Temperature range +10 °C to +40 °C
Accuracy greater than ± 0,15 %
seca 664, no. 1321 009 / -109
Weighing range 0 to 300 kg / 0 to 660 lbs /
0 to 47 sts
Graduations 100 g / 0.2 lbs
seca 664, no. 1321 139 (USA)
Weighing range 0 to 660 lbs / 0 to 300 kg
Graduations 0.1 lbs / 100 g
Colour silver grey/black
Power supply: mains unit and built-in rechargeable
battery pack
11. Spare parts and accessorie
Power supply
Model-dependent mains unit:
Description: plug-in mains unit
230 V~/50 Hz/12 V=/130 mA
seca spare part no. 68-32-10-252
Designation: USA mains unit
120 V~/60 Hz/12 V=/150 mA
seca spare part no.: 68-32-10-259
Designation: convertible desk-top mains
unit
115 V~/230 V~/50 Hz/9 V=/350 mA
seca spare part no.: 68-32-10-243
Rechargeable batteries:
Description: pack of 6 rechargeable bat-
teries, NiMH
seca spare part no.: 68-22-12-721
To Next Page
Loading...
