Seca 665 - Set-Up Process

Software seca
14.11.12/RLEU/ARI/MRE 32/40 30-34-00-812c
mode (the so-called download kernel). The “Refresh” button refreshes the
display.
5.3 Set-up Process
This function corresponds to the set-up process
carried out for a device. First of all, select the
current wireless group on the left in the main
window. You can now start teaching-in by
pressing the “Set up wireless group” button.
Change the suggested transmission channels if
required and confirm your selection with
“Confirm channels”.
Please switch on the devices to be taught in
one by one. Identification of the devices is
indicated by a series of green symbols. Set-up
is ended by pressing the “Complete login”
button.