Seca 665 - Display; Removing the Display

Replacement Instructions
seca 684, 685
13.02.13/MRE 8 30-34-00-860_E1
2 Display
Please be sure to observe the sequence listed below when removing/fitting the parts!
2.1 Removing the display
 First remove the three screws (R) from the handrail tube / display connection
and carefully pull out the display.
 Detach the plug-in connection of the modular cable (S).
Figure 7: Connection display handrail tube / plug-in connection modular cable
S1
R
S