24
Store weight value (HOLD)
You can also continue displaying the weight determined once the load has been removed.
This makes it possible to look after a patient first, before having to note the weight:
– Press the HOLD/2 in 1 key whilst the
load is on the scale.
“HOLD” appears in the digital display. The
display starts to flash, showing that the
scale is checking the stability of the weight
values. Only once stability prevails is the
displayed value stored. The value is stored
until the scale switches off automatically.
The triangle with the exclamation mark in-
dicates that this frozen display is an addi-
tional facility which is not subject to
calibration.
– The HOLD function can be switched off
by pressing the HOLD/2 in 1 key again.
0.00 appears in the display if the scale has
no load on it, otherwise the current weight.
The “HOLD” display vanishes.
Body Mass Index (BMI)
Body Mass Index puts height and weight in relationship to one another, providing more
accurate information than ideal Broca weight, for example. A tolerance range is given
which is considered ideal for health.
– Press the Start key with no load on the
scale.
se(a, 8.8.8.8.8. and 0.00 appear con-
secutively in the display. The scale is
then automatically set to zero and ready
for operation.
– Press the BMI key.
On the display, you will see the last
height entered.
– You can use the arrow keys to adjust
the value in increments according to the
graduations displayed.
– Once the correct value is set, press the
BMI key again. The BMI function is now
activated.
– Step on the scale and keep still.
– Read off the BMI on the digital display
and compare it with the categories on
page 25.
– Press an arrow key if you would like to
see the weight briefly.
To Next Page
Loading...
