EasyManua.ls Logo

Seca 701 - Spare Parts, Accessories, and Disposal; Measuring Rods and Power Supplies; Recalibration Mark; Device Disposal

Seca 701
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Model 701 29
GB
10. Spare parts and accessories
Measuring rods
Material: hard-anodised aluminium, slide with lockable measuring tab
seca 220 telescopic measuring rod
seca model 220-17-14-004:
Measuring range: 820 - 2000 mm,
Graduations: 1 mm
Power supply
Model dependent mains unit
Plug-in mains unit, Euro: 230V~ / 50Hz / 12V= / 130mA
seca spare part no.: 68-32-10-252
Desk-top mains unit, switchable, Euro: 115V~ / 230V~ / 50-60Hz / 9V= / 350mA
seca spare part no.: 68-32-10-243
Plug-in mains unit, USA: 120V~ / 60Hz / 12V= / 150mA
seca spare part no.: 68-32-10-259
Attention!
Use only seca original plug-in mains units with 9 V or controlled 12 V output voltage. Com-
mercially-available mains units may supply a higher voltage than stated and thus lead to
damage to the scale.
Recalibration
Supplementary calibration mark seca spare part no.: 14-05-01-886
11. Disposal
Disposing of the device
Do not dispose of the device in
domestic waste. The device must
be disposed of properly as elec-
tronic waste. Follow the national regula-
tions which apply in your case. For further
information, contact our service depart-
ment at:
service@seca.com
Batteries
Do not throw used batteries away in do-
mestic waste. Dispose of batteries at col-
lection points in the vicinity. When buying
new batteries, select those low in harmful
substances and containing no mercury
(Hg), cadmium (Cd) or lead (Pb).

Related product manuals