Seca 727 - 5. Before You Get Started; 5.1 Scope of Supply; 5.2 Removing Transport Securing Device; 5.3 Establishing Power Supply

Before you get started … • 57
English
5. BEFORE YOU GET STARTED …
5.1 Scope of supply
5.2 Removing transport securing device
1. Carefully turn over the scale so that the base plate
is facing upwards.
2. Undo the screws of the transport securing device.
3. Remove the transport securing device
NOTE
Keep the transport securing device for
transporting the scale at a later date.
5.3 Establishing power supply
The scale is powered by a battery block or a power
pack (both included in scope of supply). Depending on
model, the scope of supply will include either a power
pack with plug adapters or a power pack with a fixed
Euro connector.
The battery compartment and the connecting socket
b
USA/Japan
Euro
Australia
UK
ca
No. Component Qty.
a
Scale 1
b
Length tape measure, self-adhesive 1
c
Power pack with adapters (depending on model: Euro connector power
pack)
1
Battery block, not illustrated 1
Instructions for use, not illustrated 1