18
Power supply
The power supply must come from the
supplied AC adaptor.
The connector for the AC adaptor is locat-
ed under the rod.
Please only use the power supply unit
supplied with the product or power supply
units from the seca accessories range.
Before plugging into the socket, check
whether the mains voltage details on the
power supply unit match those of the local
voltage supply.
Please use only the mains unit supplied or mains units from the seca range of
accessories. Before plugging the unit into the socket, check whether the mains
voltage marked on the mains unit matches local mains voltage.
4. Setting up and aligning the scales
– Place the scales on a level surface.
– Align the scales by removing the foot
screws. The scales must stand secure-
ly on the floor on all four feet.
www.scaleman.com is your Authorized Seca Dealer
www.balances.com is your Authorized Seca Dealer
To Next Page
Loading...
