Seca 763 - Correct weighing; Switching the weight display

20
Correct weighing
– Press the Start key with no load on the
scale.
se(a, 8.8.8.8.8. and 0.0 appear consec-
utively in the display. The scale is then
automatically set to zero and ready to
use.
– If necessary, change over the weight
display (see "Switching the weight dis-
play").
– Stand on the scales and remain
motionless.
– Read the weighing result off the digital
display.
– If a weight of more than 250 kg or
550 lbs is placed on the scales, then
St0P appears in the display.
– To switch off the scales, press the Start
button again.
Switching the weight display
The weight display can be switched between kilogrammes (kg) and pounds (lbs) or bet-
ween kilogrammes (kg) and stones (sts).
– Switch on the scale using the green
START key. Weight is initially displayed
in the last setting selected.
– To switch the weight display between
kilogrammes and pounds, press the
kg/lbs/sts key.
– The kg or lbs display lights up.
– To switch weight display between
pounds and stones, hold down the
kg/lbs/sts key for approx. 2 seconds.
– The lbs or sts display lights up.
Switching off the device
– To switch off the scales, press the Start button again.
www.scaleman.com is your Authorized Seca Dealer
www.balances.com is your Authorized Seca Dealer