English
Function check • 45
NOTICE!
Damage to device
Unsuitable cleaning agents and disinfectants may damage the sensi-
tive surfaces of the device and lead to transparent components be-
coming clouded.
► Do not use aggressive or abrasive cleaning agents.
► Do not use organic solvents (e.g. white spirit or petroleum spirit).
7.1 Cleaning
► If required, moisten a soft cloth with a mild soap solution and wipe over the
device and carry case with it.
7.2 Disinfecting
1. Disinfect the device at regular intervals with a disinfectant suitable for sensi-
tive surfaces and acrylic glass (e.g. 70% ethanol).
2. Follow the instructions for use for the disinfectant.
3. Disinfect the device as follows:
► Moisten a soft cloth with disinfectant and wipe down the device with it.
► Comply with the intervals, see table:
Interval Component
Before and after
every measure-
ment with direct
skin contact
Weighing plat-
form
As required
• Display
• Carry case
7.3 Sterilizing
The device must not be sterilized.
8 FUNCTION CHECK
► Perform a function check before each use.
A complete function check includes:
• A visual inspection for mechanical damage
• A test of the alignment of the device
• A visual and function check of the display elements
• A function check of all the controls shown in the section entitled “Overview”
• A function check of the optional accessories
If you find faults or deviations during the function check, first try to remedy the
fault with the aid of the “Troubleshooting” section in this document.
17-10-06-648-100b_2024-05S
To Next Page
Loading...
