Securam ProLogic L01 - Recovery Code Set; Recover System

ProLogic L01 Operation Instructions
16
Step 4: Scroll UP to the menu selection “Recovery Code Set” and Press OK.
Step 5: You will be prompted to enter the existing Recovery Code; Press OK.
Step 6: The LCD screen will display a key Code. Record this number and call an authorized
SecuRam Recovery Center or SecuRam Tech Support at 1-805-988-8088 for an Authorization
Code. (This code remains valid for a period of 20 minutes only).
Step 7: After receiving the One Time Use Authorization Code from the Recovery Center, press
the “back” button; and you will be prompted to enter your Authorization Code.
Step 8: Next you will be prompted to enter your new 6 digit Recovery Code.
Step 9: Repeat the 6 digit Recovery Code.
The new Recovery Code has now been set. DO NOT lose this code. Without this code your
system cannot be recovered. After recovery, you can recover without using OTC for 20 minutes.