Seeworld S116 - Advanced Settings and Troubleshooting; Cancel over speed alarm; 8.7 Set and cancel vibration alarm; 8.8 Restart device SIM card

10
 Cancel the over speed alarm：text the command:#password#CLSA#
to the device’s SIM card number
Succeeding reply ： Close Speed Alarm, OK! Failure reply: Format
wrong!
Note：The default of this function is closed. Only admin and authorized
number can operate.
8.7 Set and cancel the vibration alarm.
 Set the vibration alarm ： text the
command:#password#STVA#sensitivity value# to the device’s SIM
card number
Succeeding reply: Set vibration Alarm level, OK! Failure reply:
Format wrong!
For example: if you want to set the sensitivity 2, text the
command：#8888#STVA#2#
Note：The default of this function is closed. Only admin and authorized
number can operate.
the sensitivity value of the vibration is from 1 to 3，1is the most
sensitive。
 Cancel the vibration alarm：text the command：#password#CLVA#to
the device’s SIM card number
Succeeding reply：Close vibration Alarm, OK! Failure reply：Format
wrong!
Note：Only admin and authorized number can operate. If you want to
restart the vibration alarm, you need to reset again.
8.8 restart the device’s SIM card
 restart the device’s SIM card：text the command:#password#REST#to
the device’s SIM card number
Succeeding reply：Reset System, OK! Failure reply：Format wrong!
Note：Only admin and authorized number can operate.
Note：the default password is 8888. Only admin and authorized number
can operate. If not, the server will reply：Don't allow to or The Admin
must be number, Fail!。
9. Check the location by texting
9.1 admin number or the authorized number dial the device’s number, the
device will text back with location information.
9.2longitude and latitude and location check by texting
9.2.1 the command format：#password#LOCC#