Seeworld S116 - Obtain Longitude and Latitude; 8.2 Obtain longitude and latitude; 8.3 Set time zone; 8.4 Set static;moving time interval

8
device’s SIM card number
Succeeding reply：Reset the password ,OK! Failure reply：Format
wrong!
Note：Only admin can operate.
8.2 Obtain the longitude and latitude by mobile phone.
Obtain the longitude and latitude by mobile phone：text the
command:*password*LOCC# to the device’s SIM card number
Succeeding reply：website、longitude and latitude、time, data, speed and
so on.
Note: any mobile phone number can operate.
 Obtain the longitude and latitude by mobile phone ： text the
command:#password#ADRE# reply language# to the device’s SIM
card number reply language in Chinese：CN reply language in
English：EN
Succeeding reply：the location information
Note: any mobile phone number can operate.
8.3 Set time zone
 Set time zone：text the command:#password#SETZ#time zone# to
the device’s SIM card number。
Succeeding reply：Setup Time Zone ,OK! Failure reply：Format wrong!
Note：E is eastern time zone，W is western time zone.
 Check IP and port: text the command:#password#CKIP#to the
device’s SIM card number
Succeeding reply：IP address and port
Note: any mobile phone number can operate.
8.4 Set the time interval when in static state orin moving
 Set the time interval when in static state ： text the
command:#password#SCUP# minutes # to the device’s SIM card
number
Succeeding reply：set static upload time, OK! Failure reply：Format
wrong!
For example, if you want to set the time interval of static state as 3
minutes，text the command：#8888#SCUP#3#
Note：the default is 5 minutes. Only admin and authorized number can
operate.