21
www.seuservice.com
TURNING POWER ON
Turning the AC UNIT's MAIN SW on will cause the machine to start the POWER ON check
and GAME BOARD SYSTEM check automatically.
In the POWER ON check, the steering wheel turns left and right, then returns to the centering
position and stops. In this check, the values of V. R. inside the control panel are corrected.
Until the check is finished (the steering wheel stops automatically), do not touch the steering
wheel or play the game.
If you do, the steering wheel reaction during the game (reaction at the time of a course-out or
crashing) can not be obtained correctly.
In a case of an abnormal reaction during the game, turn the power on again from the beginning
and complete the power-on check.
Note that turning power on when the Steering Wheel is fully turned right or left may sometimes
not allow for performing power on check satisfactorily. Ensure the Steering Wheel is in the
centering position, and then turn on power.
During game board system checking, the check mode will appear on the monitor. After one
minute, the screen proceeds to the network check.
During network checking, "CHECKING NETWORK NOW" is displayed on the screen. When
the network checking is finished, the DEMO mode will appear on the monitor screen.
After 30 seconds, if the network check is not finished, check connections for Communication.
NETWORK CHECK SCREENGAME BOARD SYSTEM CHECK SCREEN
naomi multi system.
MODE : MASTER
CHECKING NETWORK NOW
The steering wheel turns left/right automatically.
FIG. 6. 6
To Next Page
Loading...
Need help?
General
