64
PERIODIC INSPECTION
15
Cleaning the Cabinet Surfaces
When the cabinet surfaces become dirty, remove stains with a soft cloth soaked in water or diluted (with water) chemical detergent and then wrung
dry. To avoid damaging the fi nish, do not use such solvents such as thinner, benzene, etc. (other than ethyl alcohol) or abrasives (bleaching agent and
chemical dust-cloth).
Some general-purpose household, kitchen, and furniture cleaning products may contain strong solvents that degrade plastic parts, coatings, and print.
Before using any cleaning product, read the product's cautionary notes carefully and test the product fi rst on a small area that is not highly visible.
Remove 6 bolts to remove seat slider. Apply spray grease to the rails once every three months (use NOK KLUBER L60 or GREASE MATE: SEGA
Part No. 090-0066). After greasing, move the seat a few times forward and backward so as to allow the grease to be applied all over uniformly.
Seat (Greasing to Seat Rail Portion)
To Next Page
Loading...
Need help?
General
