63
PERIODIC INSPECTION
15
The items listed below require periodic checks and maintenance to guarantee the performance of this machine and to ensure safe operation.
ITEMS DESCRIPTION PERIOD REFERENCE
CABINET
Check that the stoppers and adjust-
ers are secured
Daily 3
CARD R/W
Clean stocker section rollers Every 10 days
7-2
Head cleaning See “Note” below
CONTROL PANEL
Volume inspection Monthly 9
Inspect engagement of adjust gears Every 3 months 9-2
Apply grease Every 3 months 9-3
Inspect input switches Monthly 9-4
SHIFT LEVER Apply grease Every 3 months 10
ACCELERATOR &
BRAKE
Volume inspection Monthly 11
Apply grease to gear and spring parts Every 3 months 11-2
MONITOR
Clean screen Weekly 13-2
Check adjustments
Monthly, or when moved
13-3
COINCHUTE DOOR
Inspect coin switch Monthly 12
Coin insert test Monthly 12
Clean coin selector Every 3 months 12
SEAT Apply grease to seat rail section Every 3 months Next page
GAME BOARD Confi rm setting Monthly 16
ELECTRONIC/ELEC-
TRICAL PARTS
Inspection, Cleaning 1 year
POWER PLUG Inspection, Cleaning 1 year 3
CABINET INTERIOR Cleaning 1 year
CABINET SURFACES Cleaning As appropriate Next page
15 TABLE 01
NOTE: When switching the unit ON/OFF after 200 plays.
PERIODIC INSPECTION
15
● Be sure to check once a year to see if Power Cords are damaged, the plug is securely inserted, dust is accu-
mulated between the Socket Outlet and the Power Plug, etc. Using the product with dust as is accumulated can
cause fi re and electric shock hazards.
● Never use a water jet, etc. to clean inside and outside the cabinet. If the machine gets wet for any reason, do not
use it until it has completely dried.
● Periodically once a year, request the place of contact herein stated or the Distributor, etc. where the product was
purchased from, as regards the internal cleaning. Using the product with dust as is accumulated in the interior
without cleaning can cause a fi re or accident. Note that cleaning the interior parts can be performed on a pay-
basis.
● There is the danger of accidents involving electrical shorts circuits or fi re caused by factors such as the deteriora-
tion of insulation in electrical and electronic equipment over time. Check that there are no abnormalities such as
odors from burning.
To Next Page
Loading...
Need help?
General
