Sega Initial D4 User Manual

1
HANDLING PRECAUTIONS
1
HANDLING PRECAUTIONS1
When installing or inspecting the machine, be very careful of the following points and pay attention to ensure that the player can enjoy the game safely.
Non-compliance with the following points or inappropriate handling running counter to the cautionary matters herein stated can cause personal injury
or damage to the machine.
● Before performing work, be sure to turn the power off. Performing the work without turning the power off can
cause an electric shock or short circuit. In the case work should be performed in the status of power on, this
manual always states to that effect.
● To avoid an electric shock or short circuit, do not plug in or unplug quickly.
● To avoid an electric shock, do not plug in or unplug with a wet hand.
● Do not expose power cords or earth wires on the surface, (fl oor, passage, etc.). If exposed, the power cords
and earth wires are susceptible to damage. Damaged cords and wires can cause an electric shock or short
circuit.
● To avoid causing a fi re or an electric shock, do not put things on or damage the power cords.
● When or after installing the product, do not unnecessarily pull the power cord. If damaged, the power cord
can cause a fi re or an electric shock.
● In case the power cord is damaged, ask for a replacement through where the product was purchased from
or the offi ce herein stated. Using the cord as is damaged can cause fi re, an electric shock or leakage.
● Be sure to perform grounding appropriately. Inappropriate grounding can cause an electric shock.
● Be sure to use fuses meeting the specifi ed rating. Using fuses exceeding the specifi ed rating can cause a fi re
or an electric shock.
● Be sure that connections such as IC BD are made properly. Insuffi cient insertion can cause an electric shock.
● Specifi cation changes, removal of equipment, conversion and/or addition, not designated by SEGA are not
permitted.
- Failure to observe this may cause a fi re or an electric shock. Non-compliance with this instruction can
have a bad infl uence upon physical conditions of the players or the onlookers, or result in injury during
play.
- SEGA shall not be held responsible for damage, compensation for damage to a third party, caused by
specifi cation changes not designated by SEGA.
● If work or parts replacement not indicated in this manual is carried out, an accident may occur. If it is nec-
essary to carry out work not indicated in this manual, be sure to have it done by the offi ce indicated in this
manual or by the point of purchase. Also, please inquire regarding details of the work involved.
● Be sure to perform periodic maintenance inspections herein stated.
● For the IC board circuit inspections, only the logic tester is allowed. The use of a multiple-purpose tester is not per-
mitted, so be careful in this regard.
● Static electricity from your body may damage some electronics devices on the IC board. Before handling the IC
board, touch a grounded metallic surface so that the static electricity can be discharged.
● Some parts are not designed and manufactured specifi cally for this game machine. The manufacturers may
discontinue, or change the specifi cations of such general-purpose parts. If this is the case, SEGA cannot repair or
replace a failed game machine whether or not a warranty period has expired.
CONCERNING THE STICKER DISPLAY
This SEGA product has stickers attached describing the product
manufacture No. (Serial No.) and Electrical Specifi cations. It also has
a Sticker describing where to contact for repair and for purchasing
parts.
When inquiring about or asking for repairs, mention the Serial No.
and Name of Machine indicated on the Sticker. The Serial Number
indicates the product register. Identical machines could have different
parts depending on the date of production. Also, improvements and
modifi cations might have been made after the publication of this
manual. In order to ensure you order the correct parts, mention the
Serial No. when contacting the applicable places.
CONCERNING WARNING DISPLAYS
This SEGA product has warning displays on stickers, labels and/or
printed instructions adhered/attached to or incorporated in the places
where a potentially hazardous situation could arise. The warning
displays are intended for accident prevention for customers and for
avoiding hazardous situations relating to maintenance and servicing
work. Some portions of the cabinet contain high voltage and may
cause accidents if touched. When performing maintenance, be very
careful of the warning displays. It is especially important that any
complex repair and replacement work not mentioned herein should
be performed by those technical personnel who have knowledge of
electricity and technical expertise.
In order to prevent accidents, caution any customer ignoring the warn-
ings to cease and desist immediately.

Sega Initial D4 Specifications

General

Brand	Sega
Model	Initial D4
Category	Game Console
Language	English