Sega LINDBERGH RED - Storage Device May be Broken; Verifying Game Program Failed; Server Not Respond; Server Mount Failed

ERROR CODES DISPLAY
5
27
DISPLAY Storage Device May be Broken.
CAUSE The program installer device is broken.
COUNTERMEASURES Send the LINDBERGH RED board in for repair with the key chip still in place.
Error 36
DISPLAY Verifying Game Program Failed.
CAUSE
The program image is unveried due to the program image not existing on the
game disk or server.
COUNTERMEASURES Check that the correct game disk is inserted.
Error 37
DISPLAY Server Not Respond.
CAUSE The server is not responding.
COUNTERMEASURES
Check the network settings.
Set IP Address and other settings.
Check that the network cable has not been pulled out.
Error 41
DISPLAY Server Mount Failed.
CAUSE The server directory is could not be reached.
COUNTERMEASURES
Check the network settings.
Set IP Address and other settings.
Check that the network cable has not been pulled out.
Error 42
DISPLAY IP Address Not Assigned.
CAUSE An IP Address could not be obtained from the DHCP server.
COUNTERMEASURES
Check the network settings.
Check that the network cable has not been pulled out.
Check that the DHCP server is running.
Error 43
DISPLAY Game Program Not Found on Server.
CAUSE No program image on the network server.
COUNTERMEASURES
Check that the game title, place on the network server, and the key chip
correspond to each other.
Error 44
DISPLAY Wrong Resolution Setting.
CAUSE The game does not support the current resolution settings.
COUNTERMEASURES Change the DIP SW to the correct settings and restart.
Caution 51
DISPLAY Wrong Horizontal/Vertical Setting.
CAUSE The monitor horizontal/vertical settings are incorrect.
COUNTERMEASURES Change the DIP SW to the correct settings and restart.
Caution 52
DISPLAY Server Not Respond.
CAUSE
A communications error occurred while the program image was being sent
through the network server.
COUNTERMEASURES Check the network connection, then restart.
Error 45