HANDLING PRECAUTIONS
1
3
• To prevent electric shock or IC Board malfunctioning, be sure to turn off the
power for the cabinet when installing or removing the IC Board.
• Extraneous matter such as dust on the IC Board can cause the IC Board to
generate heat and result in a re due to short circuit, etc. Ensure the IC Board
surfaces are always kept clean.
• Keep the IC board well cooled. The LINDBERGH RED board case is provided with
ventilating fans. Do not block the air outlets of these fans. Also do not place
anything closely to the LINDBERGH RED board case. Failure to observe these
instructions may cause an overheating and re.
• Use the LINDBERGH RED board with the SEGA specied cabinet and the power
cable. Using it with the non-specied cabinet or the power cable may cause an
overheating and re.
HANDLING PRECAUTIONS1
• Be sure to connect the IC Board and connectors completely. Insufcient
insertion can damage IC Board, etc.
• For the IC Board circuit inspection, only the use of Logic Tester is permitted. The
use of ordinary testers is not permitted as these can damage the IC Board.
• Do not subject the IC Board to static electricity when installing the IC Board in
the cabinet or when connecting wire harness connectors to the IC Board.
• When soldering buttons, etc. to the wire harnesses, be sure to remove the wire
harnesses from the IC Board so as not to subject the IC Board to heat.
• Using LINDBERGH RED without the Shield Case can cause electric wave trouble.
Be sure to use LINDBERGH RED together with the accessory Shield Case.
• Some parts are the ones designed and manufactured not specically for
this game machine. The manufacturers may discontinue, or change the
specications of, such general-purpose parts. If this is the case, Sega cannot
repair or replace a failed game machine whether or not a warranty period has
expired.
To Next Page
Loading...
Need help?
General
