Sega Showdown - Installing the Billboard

14
ASSEMBLY AND INSTALLATION
6
1
Remove the (6) sets of xings from the front face of the Billboard apature and the (5) sets of xings from
the underside. Once all (11) xings have been removed, using 2 people, carefully offer the Billboard into
postion.
2
Once in position, carefuly secure the Billboard into place using the xings removed from step 1. Losely t
the lower (5) xing initially, followed by the upper (6) xings.. Only once all xings are in place should
you then tighten them. Do not overtighten the upper (6) xings. If these xings are over tightened damage
may occur to the billboard.
AssyBillboard
FixingPoints(6)
FixingPoints(5)
6-1-1 INSTALLING THE ASSY BILLBOARD
Loselytthelower(5)xings
Donotovertightenxings
To Purchase This Item, Please Visit : BMIGaming.com | Call Global Sales : + 561.391.7200 | USA / CA : (800) 746-2255