Sega Showdown - 6-1-2 Installing the Stabilizers

ASSEMBLY AND INSTALLATION
15
6
1
Place one of the two STABILIZER plates near the xing location. Remove the M8x30 Bolts (2) from the
lower section of the cabinet as shown in Fig 6.2.1a.
2
Remove the Strengthening strap and discard. Offer the Stabilizer brkt up to the cabinet and secure using the
xings removed from step 1.
6-1-2 INSTALLING THE STABILIZERS
ItisIMPORTANTthatbothSTABILIZERSaretted.FailuretottheSTABILIZERS
mayresultinthemachinetopplingoverwhichmaycausingexreeminjuryand
damagetothecabinet.
Fig. 6.2.1a
Fixinglocation
Fig. 6.2.1b
RemovetheM8x30Bolts(2)
StabilizerPlate
Fig. 6.2.1c
Removeanddiscard
StrengtheningStrap.
Fig. 6.2.1d
FitandsecurtheSTABILIZERtothecabinet
usingtheM8x30xingsremovedfromstep1
To Purchase This Item, Please Visit : BMIGaming.com | Call Global Sales : + 561.391.7200 | USA / CA : (800) 746-2255