LAMPS AND LIGHTING
13
83
13-2 LED LIGHTING - BILLBOARD/RACE LEADER
THIS WORK ON TOP OF THE CABINET, SHOULD NOT BE UNDERTAKEN WITHOUT
THE USE OF A SUITABLE STEP OR FOOTSTOOL.
MAKE SURE THAT THE MAIN SUPPLY VOLTAGE TO THE MACHINE IS SWITCHED OFF
BEFORE ATTEMPTING TO CARRY OUT THIS WORK
Remove the 6 fixings and washers
which secure the Title Panel.
THE BILLBOARD IS LOCATED AT HEIGHT AND WEIGHTS APPROX 7KG. MAKE SURE
THAT A FOOTSTOOL OR STEP LADDERS ARE USED. ALSO HAVE ANOTHER PERSON
HELP IN THE REMOVAL PROCCESS.
Losely t the lower (5) xings
1
The Billboard LED strip is located inside the back section of the Billboard housing, before
attempting to change, TURN THE POWER OFF.
2
To gain access to the LED strip, extract the six (6) xing screws which hold the Billboard Title Panel in place
and remove.
3
Remove the 5x Philips screws which secure the Lower Speaker Panel Bkt. Whilst another person takes the
strain of the Title Panel, carefully remove the (6) xings which secure the Title Panel.
To Purchase This Item, Please Visit : BMIGaming.com | Call Global Sales : + 561.391.7200 | USA / CA : (800) 746-2255
To Next Page
Loading...
