Sega Showdown - Start and View Lamps

LAMPS AND LIGHTING
13
83
SWITCH PLATE
Disconnect the connector.
Start Button Lamp, View Change Button Lamp
1
Turn off the power
2
Remove the 4 tamper proof screws.
TAMPERPROOF SCREW (4), chrome
M4x16
3
Remove the Switch Plate. The Switch Plate contains wiring connections. Disconnect the connector, taking
care not to damage the wiring.
Please note that the images shown may differ from
actual product but the process is the same.
13-3 START AND VIEW CHANGE LAMPS
MAKE SURE THAT THE MAIN SUPPLY VOLTAGE TO THE MACHINE IS SWITCHED
OFF BEFORE ATTEMPTING TO CARRY OUT THIS WORK
To Purchase This Item, Please Visit : BMIGaming.com | Call Global Sales : + 561.391.7200 | USA / CA : (800) 746-2255