Sega Showdown - Coin Handling and Adjustments; Coin Jam and Selector Cleaning

72
COIN HANDLING
12
FIG. 12-1a
If the coin is not rejected when the REJECT button is pressed, open the coin chute door and open the selector gate.
After removing the jammed coin, put a normal coin in and check to see that the selector correctly functions.
PLEASE NOTE: That this product does not come with a Coin Validator unless stated at time of order.
Information below pertains to the type of Validator that is supplied upon request...
The Coin Selector should be cleaned once every 3 months.
When cleaning, follow the procedure below:
● Removeandcleansmearsbyusingasoftclothdippedinwaterordiluted
chemicaldetergentandthensqueezeddry.
● Neverapplymachineoil,etc.totheCoinSelector.
● AftercleaningtheCoinSelector,insertaregularcoininthenormal
workingstatusandensurethattheselectorcorrectlyfunctions.
12-1 CLEANING THE COIN SELECTOR
GATE
Handling the Coin Jam
12 COIN HANDLING
1
2
3
Turn the power for the machine OFF. Open the Coin Chute Door
Remove the Coin Selector from the Coin Chute Door
Open the gate and dust off by using a soft brush (Small soft Paint Brush, etc.)
To Purchase This Item, Please Visit : BMIGaming.com | Call Global Sales : + 561.391.7200 | USA / CA : (800) 746-2255