20
ASSEMBLY AND INSTALLATION
6
2
Fully insert the power cord connector on the side opposite the power plug into the AC unit IEC inlet. Insert
the power cord plug into the outlet.
3
When the power cord is laid out indoors. Protect the power cord by attaching a wire cover to it.
If the power cord is left uncovered it may cause a trip hazard and could result in injury. Please cover the
power cord as illustrated below.
WIRE COVER
To Purchase This Item, Please Visit : BMIGaming.com | Call Global Sales : + 561.391.7200 | USA / CA : (800) 746-2255
To Next Page
Loading...
