13
LAMPS AND LIGHTING
88
3
Remove the (2) Phillips self tapping screws fromt the Assy Woofer Bracket and remove. The LED PCB is
located on the inner side.
4
Remove the (2) Phillips self tapping screws fromt the Assy Woofer Bracket and remove. The LED PCB is
located on the inner side.
5
Re-assemble by following these intructions in reverse order. PLEASE NOTE : When retting the Woofer
Plate be very careful not to overtighten the (4) xings. Overtightening these xings WILL cause the Woofer
Plate to crack.
Remove the (2) Phillips Self
Tap Screws.
Remove the (2) Phillips
machine Screws.
LED PCB
Pt No 838-14973-01
Assy Woofer LED
To Purchase This Item, Please Visit : BMIGaming.com | Call Global Sales : + 561.391.7200 | USA / CA : (800) 746-2255
To Next Page
Loading...
