LUBRICATING OIL
Check and lubricate all components at the intervals listed in the
periodic maintenance chart. Items not listed in the chart should
be lubricated in the general lubrication interval. The rocker
arm is lubricated at the factory and does not require additional
lubrication. However, if these components are heavily used, the
user may perform additional lubrication as required.
in safe range on
dipstick
180 ml (When there is no oil
stains after internal cleaning)
160 ml (Only when changing
gear oil)
Maintain the level
between the fill lines.
Maintain the level
between the fill lines.
Suspension,
stabilizer
bar
grease
(2 pumps max)
every
800 km.
To Next Page
Loading...
