SUSPENSION ADJUSTMENT
The springs have 5 adjustment positions. The springs can be
adjusted according to terrain and loading conditions. If you feel
suspension is too soft and too hard, adjust the spring preload
according following table:
Position
1
:
Standard position
Position
2
-
5
:
When the load
can be adjusted
to this position.
Use spanner hook wrench
6
to adjust the spring preload.
When adjusting the springs, always adjust the left and right side to
the same positions; Step up or down one position only at a time
during adjustment. Do not try to make excessive adjustments which
can damage the shock absorber.
To Next Page
Loading...
