Segway FUGLEMAN SGW1000F-U2 - Driving on Slippery Surfaces; Parking the Vehicle

O
O
P
P
E
E
R
R
A
A
T
T
I
I
O
O
N
N
72
Parking the vehicle
1. Stop the vehicle on a level surface. When parking in the
garage or in other structure, be sure that the area is well
ventilated and that the vehicle is not close to any source of
flame or sparks, including appliances with pilot light.
2. Place the transmission in PARK “P”.
3. Stop the engine.
4. Slowly release the brake pedal and make sure the
transmission is in PARK before exiting the vehicle.
5. Remove the ignition key to prevent unauthorized use.
Driving on Slippery Surfaces
Whenever riding on slippery surfaces such as wet trails or loose
gravel, or during freezing weather, follow these precautions:
1. Do not operate on excessively rough, slippery or loose terrain.
2. Slow down when entering slippery areas.
3. Engage 4x4 drive before wheels begin to lose traction.
4. Maintain a high level of alertness, reading the trail and
avoiding quick, sharp turns, which can cause skids.
5. Correct a skid by turning the steering wheel in the direction of
the skid. Never apply the brakes during a skid.
Severe damage to drive train may occur if the 4x4 drive is engaged
while the wheels are still spinning. Allow the wheels to stop
completely before engaging 4x4 drive.
Engage the 4x4 drive before the wheels begin to lose traction.
NOTICE