F
F
E
E
A
A
T
T
U
U
R
R
E
E
S
S
A
A
N
N
D
D
C
C
O
O
N
N
T
T
R
R
O
O
L
L
S
S
VEHICLE ACTIVATION
This vehicle is equipped with vehicle DTS system for you. DTS is
used to communicate with background system and mobile APP, so
as to obtain vehicle information and control vehicle with mobile APP.
This is an optional system. In order to make you quickly
familiar with and use the system, read the user's manual carefully,
understand the relevant operation and use information.
IOS mobile phone: search “
Segway Powersports”
to download
application from APP STORE.
Android mobile phone: go on Google Play and then search for
“
Segway Powersports”
to download application.
After the successful installation of the application, your vehicle
will be registered and activated. Firstly, find the VIN number on the
vehicle and register it in the application. The registration procedure is
as follows:
1.
Power the vehicle with the mechanical key.
Input or scan vehicle VIN number as application prompts, and
step on the vehicle brake at the same time.
Note:
If the VIN number cannot be scanned due to low light, you
can enter VIN number manually. VIN number is located on the
frame (page 158), or on the Identification Plate (page 160).
2.
Click “
CONFIRM
” to complete the vehicle registration.
3.
Click “
START
” to start the vehicle.
The new vehicle must be activated on the APP for the first time if
equipped with DTS. Otherwise the engine will not start.
To Next Page
Loading...
