Segway FUGLEMAN SGW1000F-U2 - CVT Belt; Drying the CVT

MAINTENANCE AND STORAGE
114
CVT Belt
Replace the CVT drive belt in intervals specified in the
maintenance schedule. If the belt is damaged, have it changed by
an authorized Segway Powersports service. When replacing the
belt, clean the CVT housing pipe, clutch and engine compartment
for debris.
Drying the CVT system
In some cases, the water may ingest into the CVT system and must
be dried out it before operating.
!
W
W
A
A
R
R
N
N
I
I
N
NG
Failure to remove all debris when the belt is replaced can result
in vehicle damage, loss of control and serious injury or death.