1.
Remove the two battery pull straps
2.
Turn up the protective rubber sleeve
.
3.
Remove the battery negative terminal screw and disconnect
the black (negative) battery cable.
4.
Remove the battery positive terminal screw and disconnect
the red (positive) battery cable.
5.
Remove the battery.
Battery Charging
Using a charger that is not designed to charge maintenance-free
batteries may destroy or irreparably damage your battery. We
recommend using a Shark CN-4000 Smart Automatic Charger to
charge your battery.
When charging, batteries produce hydrogen, extremely explosive gas.
Please follow the following precautions when charging:
If charging the battery installed in the vehicle, be sure to disconnect
the ground (negative) cable.
Make sure the power switch on the charger is off when connecting and
disconnecting the charger to the battery.
Only charge slowly (5A or less), otherwise the battery may explode.
To Next Page
Loading...
