Replacing taillight/rear turn light
How to change the taillights:
1.
Remove rear light cover.
2.
Unscrew the rear light holder.
3.
Turn the bulb to be replaced from left to right. When the
bead at the end of the bulb gets stuck in the limit slot of the
bulb seat, the damaged bulb can be taken out and replaced
with a new bulb of the same specifications.
4.
Test whether the light works normally.
High beam adjustment
Headlight beam can be adjusted up and down. Use the following
procedure to adjust.
Following pictures are for reference only. Your model may slightly
differ.
It is best to let the Segway dealer to adjust high beam.
To Next Page
Loading...
