Seiko Precision BP-6000 - Power on Operation Summary

Power-on operation summary
23
3. Control panel and operations
Operation (reference page)
Self test, draft (P21)
Self test,NLQ (P21)
Hex dump, draft (P57)
Hex dump,NLQ (P57)
Vertical alignment (P61)
EEPROM initialize (P55)
LF FF ON LINE PARK TOF SET M. LF M. RLF RLF TEAR OFF SETUP BIN RESET POWER
1. Use either the RESET key or power switch when the circle is in both the RESET and
POWER columns.
2. EEPROM initialize operation requires the vertical alignment operation after the execution
of the EEPROM initialize.
Notes