85
ITEM Mode Code & Hexadecimal n: (Hex.) = selection
[1] Font Header A n n: 00=Roman, n : 10h=Code (Draft),
1B, 7C, 60, 02, 00, 41, n 01=Sans Serif, 11h=S.D.,
12h=S.S.D,
[2] Character Header B n n: 00=Code, n: 05=15 cpi,
spacing 1B, 7C, 60, 02, 00, 42, n 01=5 cpi, 06=17 cpi,
02=6 cpi, 07=20 cpi,
03=10 cpi, 08=Proportional.
[3] Page length Header C n n: 00=Code n: 07=5.5", n: 0E=16.5",
(Fanfold) 1B, 7C, 60, 02, 00, 43, n 01=2", 08=7", 0F=8",
02=2.5", 09=8.5", 10=14",
03=3", 0A=10", 11=16",
04=4", 0B=11", 12=17",
05=4.5", 0C=12", 13=22".
06=5", 0D=15",
[4] Page length Header i n n: 00=Code, n:07=Letter portrait,
(Single) 1B, 7C, 60, 02, 00, 69, n 01=B5 portrait, 08=Letter landscape,
02=B5 landscape, 09=Legal portrait,
03=A4 portrait, 0A=Letter landscape,
04=A4 landscape, 0B=A3 portrait,
05=B4 portrait, 0C=A3 landscape.
06=B4 landscape,
[5] Multi-part Header D n n: 00=Normal, n: 02=Dark2,
1B, 7C, 60, 02, 00, 44, n
01=Dark1, 03=Dark3.
[6] Select setup Header E n n: 00=MEM1, n: 02=MEM3,
1B, 7C, 60, 02, 00, 45, n
01=MEM2, FF=Factory default.
[7] Loading Header G n n: n/72" (0 ≤ n ≤ 180)Decimal
adjustment 1B, 7C, 60, 02, 00,47, n
[8] Paper width Header H n n: 00=Manual≥9", n: 02=Fanfold≥9",
1B, 7C, 60, 02, 00, 48, n
01=Manual<9" 03=Fanfold<9"
[9] Line width Header I n n: 00=13.6 inches,.
1B, 7C, 60, 02, 00, 49, n
01=8 inches.
[10] Print direction Header J n n: 00=Predirection, n: 02=Bidirection.
1B, 7C, 60, 02, 00, 4A, n 01=Unidirection,
[11] Line spacing Header K n n: 00=Code (6 lpi), n: 02=8 lpi,
1B, 7C, 60, 02, 00, 4B, n 01=Code (8 lpi), 03=9 lpi.
[12] Override Header L n n: 00=Non-override,
1B, 7C, 60, 02, 00, 4C, n 01=Override.
[13] Auto scroll Header M n n: 00=No scroll,
1B, 7C, 60, 02, 00, 4D, n 01=Autoscroll TOF ONLY
02=Autoscrol
at Any pos,
[14] Label mode Header N n n: 00=Non label mode,
1B, 7C, 60, 02, 00, 4E, n
01=Label mode.
[15] Default page Header O n n: 00=11 inches,
length 1B, 7C, 60, 02, 00, 4F
, n 01=12 inches.
[16] P.out detection Header P n n: 00=No (detection disabled),
1B, 7C, 60, 02, 00, 50, n 01=Yes (detection enabled).
[17] P.out buzzer Header Q n n: 00=No sound,
1B, 7C, 60, 02, 00, 51, n
01=Sound.
B. Control code summary (Setup options)
To Next Page
Loading...
