Your watch can switch between its main-dial and sub-dial.
Both the conditions for DST (Daylight Saving Time) set in the main-dial and the conditions for DST (Daylight Saving Time) set in the sub-dial switch.
This comes in handy in the following situations.
• Matching the main-dial to the time for the time zone set in the sub-dial
• To use your watch, adjust the main-dial to the local time, and then, after returning home, restore the main-dial to the sub-dial’s Japan Standard Time
How to switch the main-dial and sub-dial
1
Press and hold buttons A and B at the same time (1 second)
Press buttons A and
B at the same time for
1 second
Main-dial: time in Tokyo
Sub-dial: time in New York
Main-dial: time in New York
Sub-dial: time in Tokyo
The seconds hand indicates the time zone for the main-dial that was switched. The multi-function indicator hand indicates the setting status for DST (Daylight Saving Time) of the main-dial that was switched.
Afterward, the main-dial’s hour and minute hands, sub-dial, and date switch.
Finally, the seconds hand returns to the time display, and the multi-function indicator hand returns to the day of the week display (or the charging status display).
* The buttons cannot be operated while the hour and minute hands, multi-function indicator hand, or sub-dial is moving.
Switching between the main-dial and sub-dial (Time Transfer Function)
30
4
BASIC OPERATION (HOW TO SET THE TIME/HOW TO RECEIVE GPS SIGNALS, ETC.)
5X83 GPS SOLAR
To Next Page
Loading...
