Manual time adjustment
The watch can be set to the precise current time of the currently set time zone.
(The time zone is not changed.)
→ How to manually adjust the time P. 24
→ Check the time zone and DST (Daylight Saving Time) settings P. 27
*
In the manual time adjustment, the precise time of the currently set time zone is displayed.
When the region or time zone where the watch is used is changed, adjust the time zone. → How to adjust the time zone
P. 22
(If the time zone is adjusted, the time zone setting, time and date will be adjusted, so it is not necessary to manually adjust the time immediately thereafter.)
*
Except when time zone adjustment (reception) is successful and DST = "AT," DST (daylight saving time or "summer time") is not set automatically. Please perform the setting manually. → Set DST (Daylight Saving Time) P. 26
* Failure or success of reception depends on the reception environment. → Place where GPS signals can be easily received/Place where GPS signals cannot be received
P. 18
* At the time when the reception was successful by manually adjusting the time, automatic time adjustment may be performed. For details, refer to “Automatic time adjustment” P. 31.
*
GPS signal reception consumes considerable energy.
It is necessary to charge the watch by exposing it to light so that the multi-function indicator hand can continuously display the day of the week (the energy level will be “middle” or “full”). → How to charge the watch P. 16
(If the energy level is “low,” reception will not begin even if GPS signal reception is operated.)
→ Check the charging status
P. 14
To adjust only the time by GPS signal reception (manual time adjustment)
23
4
BASIC OPERATION (HOW TO SET THE TIME/HOW TO RECEIVE GPS SIGNALS, ETC.)
5X83 GPS SOLAR
To Next Page
Loading...
