Seiko 5X83 - Adjustable Three-Fold Clasp Operation; Wearing and Removing the Watch; Adjusting Band Length

Some bands are provided with an adjustable three-fold
clasp.
If the clasp of the watch you purchased is of this type,
please refer to the following instructions.
1
While pressing the push buttons on both
sides of the flap, pull the band out of the
movable loop and fixed loop. Then open
the clasp.
Fixed loop
Movable loop
Buckle
Flap
Push button
2
Place
the
tip of the band into the movable
loop and fixed loop, and fasten the clasp
by pressing the frame of the buckle.
1
While pressing the push buttons on both
sides of the flap, pull the band out of the
movable loop and fixed loop. Then open
the clasp.
Fixed loop
Movable loop
Buckle
Flap
Push button
2
Press the push buttons again to unfasten
the flap.
3
Pull the pin out of an adjustment hole of
the band. Slide the band to adjust its
length and
find an appropriate hole. Place
the pin into the hole.
Pin
Adjustment hole
4
Fasten the flap.
●How to wear or take off the watch ●How to adjust the length of the band
* The above illustrations are provided as examples. Some details may differ depending on the model.
How to use an adjustable three-fold clasp
44
6
TO PRESERVE THE QUALITY OF YOUR WATCH
5X83 GPS SOLAR