Preliminary position of this
watch
The
preliminary position of the date is “1” (1st).
The preliminary position of the hour/minute
hands is “12:00 AM”.
1
Pull out the crown to the second
click
The seconds hand will move to the 0-second position.
Pull out
the crown to
the second
click
2
Continue to press Button B
(3 seconds)
The watch enters the mode for setting the standard
position of the date.
Press for
3
seconds
* During
movement of the date, the buttons cannot be
operated.
The seconds hand stops at the 18-second position.
The date moves, and stops when it indicates the
standard position.
3
Turn the crown to adjust the date to
“1”
Adjust so that the numeral “1” appears in the center of
the date window.
* If “1” is displayed, go to operation D
Turn the crown clockwise to
advance 1 step.
Turn the crown
counterclockwise
to set back
1 step.
Turn quickly to move
continuously.
Turn again to stop
moving.
Set the standard position of the date and the hour and minute hands
41
7
TROUBLESHOOTING
ASTRON 3X22 GPS SOLAR
To Next Page
Loading...
