Seiko SII RP-F10 SERIES User Manual

34
■ USB Host Interface Connection
Ensure that the printer is off. (1)
Connect the plug of USB host interface cable to the USB host connector on the back side of the (2)
printer.
Turn on the printer. (3)
Figure 13-6 Printer and USB Cable (USB Host) Connection
NOTE
◆
DO NOT connect except our specified peripheral device to the USB host connector.

Seiko SII RP-F10 SERIES Specifications

General

Brand	Seiko
Model	SII RP-F10 SERIES
Category	Printer
Language	English