31
13. CONNECTING TO PERIPHERAL DEVICE
This printer can be used by connecting the drawer and our specified accessories to the specified
connector.
■ Drawer Connection
Ensure that the printer is off. (1)
Plug the drawer kick cable to the drawer kick connector on the back side of the printer. (2)
Turn on the printer. (3)
Figure 13-1 Printer and Drawer Kick Cable Connection
NOTE
◆
When connecting or disconnecting the drawer kick cable, hold the plug. Never pull the
cable.
◆
NEVER connect the drawer kick cable to other interface connector including USB
interface or Ethernet interface.
◆
NEVER connect plugs including other interface cables or phone line to the drawer kick
connector.
To Next Page
Loading...
Need help?
General
