23
10. TEST PRINT
The printer can perform a test print.
In the test print, such as the firmware version and setting values of function settings are printed.
Install the thermal paper in the printer as instructed in "8. LOADING THERMAL PAPER". (1)
Ensure that no error occurs, and then turn off the printer.
Hold the FEED Switch down and press the POWER Switch, then release the POWER Switch first. (2)
Release the FEED Switch when the test print has been started.
The printer cuts the paper and returns to the print-ready status when the test print has completed. (3)
Figure 10-1 Test Print Sample
(USB + USB Host Model)
To Next Page
Loading...
Need help?
General
