28
12. CONNECTING TO HOST DEVICE
The printer supports the USB interface, the Ethernet interface and the Bluetooth interface.
The available interface varies depending on the model, order the model of interface method to use from
the following.
USB + USB host model (RP-F10-x27J1-2) : USB interface
Ethernet + USB host model (RP-F10-x27J1-3) : Ethernet interface
Bluetooth + USB host model (RP-F10-x27J1-4) : Bluetooth interface
Each interface cables are required separately for communication with the USB interface or Ethernet
interface. See "18. SPECIFICATIONS" for details of interface specifications.
The communication speed may be decreased depending on processing by software or print contents.
■ USB Interface / Ethernet Interface
Ensure that the printer is off. (1)
Connect the interface cable to use to the interface connector on the back side of the printer. (When (2)
connecting a USB cable, lock the USB cable with the wire clip as shown in Figure 12-3.)
Turn on the printer, and send data from the host device to the printer. (3)
Verify that the data is printed correctly. (4)
Figure 12-1 Printer and USB Cable Connection
To Next Page
Loading...
Need help?
General
