4
Procedures to take when in trouble
Follow the instructions in the following cases. Failure to follow the instructions may lead fire, electric shock,
or accident.
Turn off the printer, and unplug the AC plug from the outlet in any of the following cases:
◆
Abnormal status continues.
◆ The products are giving off an unusual smell, smoke, excessive heat or unusual noise.
◆ A piece of metal, water or other foreign objects get into the products.
◆
When the cable of the AC adapter or AC cable is damaged, unplug the AC plug from the outlet.
DO NOT use a damaged AC adapter or AC cable.
CAUTION
Observe the following instructions. Failure to follow the instructions may lead fire, electric shock, or
accident.
Turn off the printer and unplug the AC plug from the outlet when not in use for a long time or
before maintenance.
DO NOT use or store the products in the following locations:
◆
Locations exposed to direct sunlight or high temperature.
◆ Locations exposed to high humidity, a lot of dust, and liquid.
◆
Locations subject to strong vibration, or unstable locations.
DO NOT cover the products with a cloth when in use.
NEVER touch the thermal head immediately after printing because it may get hot. Be sure to allow
it to cool down before clearing a paper jam or cleaning the head.
The autocutter printer has an exposed cutter blade in the paper outlet. Do not insert fingers into
printer.
Avoid touching the exposed blade while the paper cover of the printer is open.
Keep loose objects such as long hair away from the printer while the printer operates. When they
fall into the printer, it may cause personal injury or damage the printer.
Keep the products away from infants and children.
To Next Page
Loading...
Need help?
General
