Purpose of the manual 3
1) PURPOSE OF THE MANUAL
This manual is designed to provide authorised service centres
with the basic information necessary for performing repairs on
the models Genesis 302 AC/DC and 382 AC/DC.
In order to avoid serious injury to persons or damage to things,
this manual must be used only by qualified technicians.
Selco S.r.l. accepts no liability for any injury to persons or dama-
ge to things that may occur during performance of repairs, even
after reading or practical application of this manual.
For a detailed description of the operation, use and ordinary
maintenance of the machine, please refer to the "Instructions for
use and maintenance manual" which must always accompany
the machine. The purchaser must follow the directions contai-
ned in the above manual. Failure to do so will exempt Selco
from all liability.
The operations described in this manual require the use of a
digital multimeter, an AC/DC ammeter clamp and a basic kno-
wledge of how the machine works. Basic electrotechnical kno-
wledge is also required.
Repair consists in identification of the faulty part, included in
the list of available spare parts, and replacement of it.
In the event of failure of an electronic board, repair entails
replacement of the board and not replacement of the faulty
electronic component on the board.
For troubleshooting advice, see introduction to chapter 9.
Do not carry out modifications or maintenance not scheduled
in this manual.
If the problem cannot be solved by following the instructions
provided in this manual, contact the Selco Service Department
or send the machine to Selco for repair.
To Next Page
Loading...
