Need help?Do you have a question about the Selco WF 115 and is the answer not in the manual?
Covers personal protection (PPE), protection from fumes/gases, and fire/explosion prevention.
Explains EMC requirements, installation, use, and emission reduction methods.
Specifies the equipment's Ingress Protection rating and its meaning.
Guidelines for safely lifting, moving, and unpacking the welding equipment.
Recommendations for placing the welding system and gas cylinders in a suitable environment.
Steps for connecting the welding power source to the power supply, cables, and gas fitting.
Procedures for initial setup and checking of the welding equipment before use.
Overview of the UNISTEP Series systems for continuous wire welding.
Details the controls and indicators on the WF 115 welding machine's front panel.
Details controls, setup parameters, and alarm codes for the WF 115 XP.
Identifies the connectors and features on the rear panel of the welding system.
Outlines regular maintenance tasks, safety precautions, and cleaning for the welding equipment.
Explains MIG system components and basic operation.
Details SHORT-ARC, SPRAY-ARC, and key welding parameters like voltage and wire speed.
Describes common shielding gases (CO2, Argon, Helium) and their effects in MIG/MAG welding.
Provides detailed technical data for both WF 115 and WF 115 XP models.
General| Brand | Selco |
|---|---|
| Model | WF 115 |
| Category | Welding System |
| Language | English |
To Next Page