ENGLISH GERMAN FRENCH SPANISH DUTCH
9
“HOME” Button
Whenever you wish to return the antenna back to the Home
position, press and hold the“Home” button for a few seconds.
i.
Function Description Operation
E. Back to Home position
If you want to change desired satellite, you can change the
target satellite using the “Up/Down” buttons, then press
the “OK” button to select the new satellite.
i.
Function Description Operation
“OK” Button
“Satellite
Up / Down button” Light
D. Changing the satellite
GPS LED conrms the current location from 24 GPS satellites
in the world.
When your SNIPE identies a GPS signal, GPS LED light will
remain on, regardless if the antenna is pausing or moving.
GPS can help to search for the satellite faster & catch the
optimum satellite signal, and assist SNIPE to acheive the
best elevation & skew angle.
Function Description
“GPS” light
Operation
i.
Also, while program updating, the GPS LED light will ash
to show the update procedure is processing. During this
time, GPS LED light on doesn’t mean the unit is communi-
cating with GPS satellite.
iii.
ii.
F. GPS LED light
To Next Page
Loading...
Need help?
General
